Extract Netlist from Gerber / NC Drill data

Need Help? Ask your questions here.

Extract Netlist from Gerber / NC Drill data

Postby CSMD » Fri Aug 09, 2013 6:29 am

Hi,

Is there a written procedure on how to extract Netlist from loaded Gerber and NC Drill data using Viewmate Pro ?

Thanks.
CSMD
 
Posts: 4
Joined: Sat Jul 20, 2013 4:35 am

Re: Extract Netlist from Gerber / NC Drill data

Postby marius » Sat Aug 10, 2013 2:15 pm

Look for information relating to netlist in the CAM manual CAMGuide.pdf.
You can find it at: ftp://ftp.pentalogix.com/Documents/
Note that ViewMate Pro can only do raster netlist, which is an approximate method (depends on the resolution you select).
CAMMaster and CAMMaster Designer have the more advanced "Contour Netlist" which computes the netlist by doing computation based on polygons.
There are more netlist related documents at the above FTP site. Look in the Appnotes\Netlist folder.
And, if you have more questions, contact us at support@pentalogix.com or call our support phone number.
marius
 
Posts: 179
Joined: Tue Dec 01, 2009 10:25 am


Return to Support Q&A for ViewMate

Who is online

Users browsing this forum: Google [Bot] and 1 guest

cron