Problem with activation

Using ViewMate and Smart DFM to quote and order PCBs directly.

Re: Problem with activation

Postby marius » Mon May 03, 2010 2:07 pm

For activation link problems you will need to contact Technical Support at support@pentalogix.com. I am guessing that by now you have done that already, if not, please do.
marius
 
Posts: 179
Joined: Tue Dec 01, 2009 10:25 am

Re: Problem with activation

Postby 1Toody » Sun Aug 07, 2011 3:09 am

For activation link problems you will need to contact Technical Support at support@pentalogix.com. I am guessing that by now you have done that already, if not, please do.

You are not right. Let's discuss it.
1Toody
 
Posts: 1
Joined: Sun Aug 07, 2011 3:05 am
Location: Kazakhstan

Re: Problem with activation

Postby pentagone » Sat Apr 18, 2015 1:01 am

In ViewMate and ViewMate Deluxe (which don't have this tool) you need to do a visual inspection. This can be done by setting the layer colors for the two layers to examine to contrasting colors (red and green work well for this - if set this way where the two layers match the displayed color will be yellow, so whenever you see red or green you know that those parts exist in only one of the layers).
You need to make visible only the two layers that you are investigating (if there are more than two layers loaded). You can do this by using the
pentagone
 
Posts: 1
Joined: Sat Apr 18, 2015 12:59 am


Return to Quote and Order Circuit Boards with Pentalogix

Who is online

Users browsing this forum: No registered users and 2 guests

cron