Page 1 of 1

Re: Problem with activation

PostPosted: Mon May 03, 2010 2:07 pm
by marius
For activation link problems you will need to contact Technical Support at support@pentalogix.com. I am guessing that by now you have done that already, if not, please do.

Re: Problem with activation

PostPosted: Sun Aug 07, 2011 3:09 am
by 1Toody
For activation link problems you will need to contact Technical Support at support@pentalogix.com. I am guessing that by now you have done that already, if not, please do.

You are not right. Let's discuss it.

Re: Problem with activation

PostPosted: Sat Apr 18, 2015 1:01 am
by pentagone
In ViewMate and ViewMate Deluxe (which don't have this tool) you need to do a visual inspection. This can be done by setting the layer colors for the two layers to examine to contrasting colors (red and green work well for this - if set this way where the two layers match the displayed color will be yellow, so whenever you see red or green you know that those parts exist in only one of the layers).
You need to make visible only the two layers that you are investigating (if there are more than two layers loaded). You can do this by using the